Skip to content
Eldershine

Pro-Cyber

Pilot / early access

Process-level anomaly detection for PLC data: it checks that what the HMI shows is consistent with how the process behaves.

Overview

Pro-Cyber reads process values from PLCs and flags readings that are statistically out of pattern, change faster than the process physically can, or change state unexpectedly. The aim is to catch spoofed HMI/SCADA values and failing instruments that network-level tools don't see. It is at pilot stage and is offered with the ICS security services, not as a packaged product.

Who it's for: Water utilities and industrial operators who want an independent check on process data at the PLC level, especially on remotely accessible sites.

What it does today

  • Collects data over Modbus TCP, Modbus RTU (serial), MQTT or HTTP/REST.
  • Statistical outlier detection: flags readings more than two standard deviations from the rolling mean for that sensor.
  • Rate-of-change detection for values that move faster than the process allows.
  • Status-change monitoring and fixed threshold alarms.
  • Severity-graded alerts sent to configurable channels, and an audit log of every detected anomaly.
  • Expected ranges, thresholds, protocols and alert channels are set per process in configuration.

Being developed

  • A lightweight build for edge hardware (Raspberry Pi class devices and industrial PCs) and, later, microcontrollers.
  • Machine-learning anomaly models for process pumps and chemical dosing systems. This is research, not a shipping feature.

Limitations

What it doesn't do, or does only with conditions.

  • It is not a network intrusion detection system. It doesn't inspect packets or traffic; it looks at process values.
  • Detection is statistical and needs a period of normal operating data to set expected ranges.
  • Pilot software: deployments are scoped and supported case by case.